 |
 |
| Amplificator profesional Class H |
HPS 2500 is a 2 channel power amplifier that delivers up to 2x 1400 W RMS @ 2 Ω (2800 W RMS bridged @ 4 Ω)
.
XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems are provided for the maximum flexibility.
A forced air cooling system maintains a low operating temperature. |
| CARACTERISTICI |
| Fast response and low distortion |
| Easy to configure in stereo / mono / bridge modes |
| Extensive protective circuits ensure high reliability and operating safety |
| Front panel signal / clip / protect LED indicators |
| Minimum load impedance (stereo / mono): 2 Ohm |
| XLR input connectors |
| SPEAKON output connectors |
| Switchable limiter |
| 2 unit 19" rack, low weight for easy transportation |
|
|
|
| APLICAŢII |
| • Professional touring racks |
| • Installed Sound Systems |
|
| AMPLIFIER SPECIFICATIONS |
|
| Power output stereo 2Ω: |
2x 1400 Watt RMS |
| Power output stereo 4Ω: |
2x 1100 Watt RMS |
| Power output stereo 8Ω: |
2x 700 Watt RMS |
| Power output bridged 4Ω: |
2800 Watt RMS |
| Power output bridged 8Ω: |
2200 Watt RMS |
| Frequency Response: |
20 Hz ÷ 20 kHz |
| THD @ 1 kHz: |
0.05 % , 1 dB below clip |
| Signal / noise rate: |
106 dB |
| Damping factor @ 8 Ω |
> 300 |
| Slew rate: |
50 V/μS |
| INPUT SECTION |
|
| Input connector: |
XLR |
| Input sensitivity: |
1.4 dBm/V RMS |
| Input impedance: |
20 kΩ (balanced), 10 kΩ (unbalanced) |
| OUTPUT SECTION |
|
| Output connector: |
Speakon |
| SYSTEM PARAMETERS |
|
| Cooling: |
Forced |
| Voltage gain: |
32 – 26 dB |
| Amplifier class: |
H |
| POWER REQUIREMENT |
|
| Operating voltage: |
220 ÷ 240 V (50 / 60 Hz) V ~ Hz |
| PHYSICAL SPECIFICATIONS |
|
| Height: |
88 mm |
| Width: |
482 mm |
| Depth: |
420 mm |
| Net Weight: |
19 kg |
|
 |
 |
|
|
|
Descărcaţi aici catalog Professional Amplifiers în limba engleză.
 PDF, 10.7MB
|
|
|
|
|
Manual de utilizare pentru RCF HPS-2500 în limba engleză şi italiană.
[PDF, 4.79MB]
|
|
|
|
